Máy Đo Độ Nhám Bề Mặt Surftest Extreme SV-3000CNC S [mm] Mitutoyo, 178-509-12

Description These is a fully CNC surface roughness measuring instrument with powerful software FORMTRACEPAK. The Surftest Extreme SV-3000CNC offers you the following benefits: It is perfectly made for increased throughput of multiple profile and workpiece measurement tasks. Each axis has a drive speed of up to 200 mm/s. You can take continuous measurement over horizontal and inclined surfaces by power-tilting the drive unit. Within the measuring range of the styli software FORMTRACEPAK supports contour calculation features. 3D topography measurement as option available. Inclined plane measurement is possible through 2-axis simultaneous control in the X and Y directions. The detector unit incorporates an anti-collision safety device, causing it to automatically stop if its main body collides with a workpiece or jig. All models equipped with Y-axis. Z-axis tracking measurement for models without α-axis. Y-axis table unit: Installed Resolution: 0.05 µm Traverse: X = 200 mm Y = 200 mm Scale: Reflective-type linear encoder Measuring speed: 0.02 - 2 mm/s Drive speed: 200 mm/s (max. CNC) 0-60 mm/s (joystick) Traverse straightness: 0.5 µm / 220 mm Inclining range: -45° (CCW) to +10° (CW) Range: 800 µm; 80 µm; 8 µm (up to 2.4 mm with an optional stylus) Dimensions (WxDxH): 800 x 651 x 1000 mm 800 x 651 x 1200 mm *¹ Dimensions (WxDxH): 320 x 646 x 105 mm Dimensions (WxDxH): 1000 x 895 x 715 mm Standard: EN ISO, VDA, JIS, ANSI and customize setting Profiles: Primary Profile (P), Roughness Profile (R), Waviness (W), MOTIF (R, W) and more Software: FORMTRACEPAK Allows control of all axis, motor-driven Y-axis table and optional rotary table for efficient automated measurement. Surface roughness analysis and contour evaluation can be performed using analysis of level differences, angle, pitch, area and contour tolerancing as standard. An inspection certificate can be created by setting the print format as required. Optional accessories: Other optional and standard accessories are listed later in different sections for accessories and styli. Base material: Granite *VAT excluded. All products are intended to be sold to commercial customers. Product illustrations are without obligation. Product descriptions, in particular any and all technical specifications, are only binding when explicitly agreed upon. ` Cataloge: