Máy đo biên dạng - độ nhám Mitutoyo Formtracer Extreme CS-H5000CNC H [mm] X=200mm; Z2=500mm; Y-axis, 525-707-12

Description This is the highest-accuracy stylus type CNC surface roughness and contour measuring instrument. The Formtracer Extreme CS-5000CNC / CS-H5000CNC offers you the following benefits: It meets the highest demands of accuracy and repeatability. You can carry out simultaneous analysis of roughness and contour within one measurement. It includes a cabin and a vibration stand as standard to avoid external influences. High resolution in X1-axis: 5 nm and Z1-axis: 0,8 nm/1,6 nm. The X1 and Z2-axis have maximum drive speeds of 40 mm/s and 200 mm/s respectively. Model: CS-H5000CNC H + Y-axis Z2-axis range [mm]: 500 Y-axis table unit: Installed Traverse: Z2 = 300 mm / 500 mm Measuring speed: Roughness measurement: 0.02 - 0.2 mm/s Contour measurement: 0.02 - 2 mm/s Drive speed: CNC mode: max. 200 mm/s Joystick mode 0 - 50 mm/s Accuracy: CS-5000CNC: X = (0,3+0.002L) μm Z1 = (0,3+I0,02HI) μm CS-H5000CNC: X = (0,16+0,001L) μm Z1 = (0,07+I0,02HI) μm [ L : Drive length (mm) ] [ H : Measurement height from the horizontal position (mm) ] Traverse straightness: CS-5000CNC: X = (0,1+0,0015L) μm [ standard stylus ] X = (0,2+0,0015L) μm [ double length stylus ] CS-H5000CNC: X = (0,05+0,0003L) μm [ standard stylus ] X = (0,1+0,0015L) μm [ double length stylus ] Resolution: X = 0,005 μm Z1 = 0,0008 μm [ standard stylus ] Z1 = 0,0016 μm [ double length stylus ] Software: FORMTRACEPAK Allows control of all axis, optional motor-driven Y-axis table and rotary table for efficient automated measurement. Contour evaluation can be performed using analysis of level differences, angle, pitch, area and contour tolerancing as standard. An inspection certificate can be created by setting the print format as required. Measuring range: X = 200 mm Z1 = 12 mm [standard lenght stylus ] Z1 = 24 mm [double lenght stylus ] *VAT excluded. All products are intended to be sold to commercial customers. Product illustrations are without obligation. Product descriptions, in particular any and all technical specifications, are only binding when explicitly agreed upon. ` Cataloge: