Đồng Hồ So Điện Tử Đặc Biệt, Digital Indicator Peak Hold, ANSI / AGD Inch/Metric, 0,5", 0,00005", Lug Back, 543-302

Description This indicator is the MAX/MIN/RANGE value holding function model It offers the following benefits: The MAX/MIN/RANGE (run-out value) can be measured A fast measurement frequency mode(detection cycle 20 ms or 50 times/s) is selectable to measure in the peak detection mode (MAX/MIN/RANGE) more reliably Easy indicator setup via a setup menu Analogue bar graph in the display (12 different scales switchable) GO/±NG tolerance judgement function This indicator enables the use of a calculation function for the measured value Ax Coefficient A is freely definable and x = displacement of the plunger A USB interface box can be used to set up the indicator from PC via dedicated software Range: 0.5"/12.7 mm Digital step: 0,00005"/0,001 mm Mass: 170 g Repeatability: 0,0001"/0,002 mm Range: 0,5" Inch Max. Permissible Error (Total Range): 0,0001"/0,003 mm Hysteresis: 0,0001"/0,002 mm Data output: Yes H MPE (Hysteresis): 0,0001"/0,002 mm Measuring force: ≤ 1,5 N Scale: Capacitance type, ABSOLUTE linear encoder Max. response speed: Unlimited Stem Ø: 9,52 mm Contact point: Carbide ball, thread # 4-48 UNF Alarm: Low voltage, ABS composition error, overflow error, tolerance limit setting error Power supply: 1 battery CR-2032 Battery life: Standard mode: approx. 1 year fast mode: approx. 4.5 month Display: LCD, character height: 8 mm, rotatable 330° Protection: IP42 Max. response speed: Unlimited Measurement frequency (MAX/MIN/RANGE): Standard mode: 10 times/s fast mode: 50 times/s (plunger speed max. 50 µm/s for peak measurement) Delivered: Including 1 battery Counting direction switchable: Yes Low voltage alarm: Yes ZERO/ABS: Yes GO/±NG judgement: Yes Digimatic data output: Yes ON/OFF: Yes Lock function: Yes Fast measurement mode: yes Function lock: Yes MAX/MIN/RANGE: Yes PRESET 3x: Yes Analog bar resolution switchable: Yes Calculation function (with formula): Yes Power supply report: UN 38.3 Test Summary Report Digital/Analog: Digital Inch-Metric: Inch/Metric Type: ASME/ANSI/AGD Standard Remarks: Center-lug back shown is optional *VAT excluded. All products are intended to be sold to commercial customers. Product illustrations are without obligation. Product descriptions, in particular any and all technical specifications, are only binding when explicitly agreed upon. ` Cataloge: