Đồng Hồ So Điện Tử Cấp Nguồn Bên Ngoài, Digital Indicator Signal ID-C 12,7mm, 0,001mm, with Flat Back, 543-350B

Description This indicator allows you to use a calculation function for the measured value Ax+B+Cx-1 The integrated calculation formula is useful in a variety of applications (e.g. roll diameter measurement) Coefficients A,B and C are freely definable. X = displacement of the plunger Analogue bar graph in the display (14 different scales switchable) GO/±NG tolerance judgement function MAX/MIN/RANGE function to measure peak values A fast measurement frequency mode(detection cycle 20 ms or 50 times/s) is selectable to measure in the peak detection mode (MAX/MIN/RANGE) more reliably Easy indicator setup via a setup menu A USB interface box can be used to set up the indicator from PC via dedicated software Range: 12.7 mm Digital step: 0,001 mm Range: 12,7 mm mm Max. Permissible Error (Total Range): 0,003 mm Hysteresis: 0,002 mm H MPE (Hysteresis): 0,002 mm Repeatability: 0,002 mm Data output: Yes Mass: 285 g Measuring force: ≤2,5 N N Scale: Capacitance type, ABSOLUTE linear encoder Max. response speed: Unlimited Stem Ø: 8 mm Contact point: Carbide ball, thread M 2.5 x 0.45 mm Alarm: Counting value composition error, overflow error, tolerance limit setting error Power supply: 5 - 24 V DC / 100mA (max) Protection: IP54 Display: LCD, character height 8 mm Max. response speed: Unlimited Measurement frequency (MAX/MIN/RANGE): Standard mode: 100 times/s (plunger speed max. 0.1mm/s for peak measurement) Delivered: With signal cable 4 m. One end is fixed to the main unit. no connector is supplied for the other end. Counting direction switchable: Yes Signal output: (+NG, OK, -NG): Yes Signal input: No-voltage input, (PRESET_RECALL/ZERO, HOLD_RESET): Yes ZERO/ABS: Yes GO/±NG judgement: Yes ON/OFF: Yes GO/±NG judgement via LED: Yes GO/±NG judgement on LCD: Yes MAX/MIN/RANGE: Yes Function lock: Yes PRESET 3x: Yes Analog bar resolution switchable: Yes Calculation function (with formula): Yes Digital/Analog: Digital Inch-Metric: Metric Type: EN ISO Standard Remarks: Center-lug back shown is optional *VAT excluded. All products are intended to be sold to commercial customers. Product illustrations are without obligation. Product descriptions, in particular any and all technical specifications, are only binding when explicitly agreed upon. ` Cataloge: