Máy kiểm tra độ cứng Rockwell HR-620B Mitutoyo, 810-525-11

Description • A workpiece that cannot be placed on a tester due to its large size can be placed on the table of this product and tested as is. (Maximum loading mass 100 kg) • The motorized stage makes automatic multi-point testing at multiple places and of multiple workpieces possible. • Plastic hardness testing is also available in addition to Rockwell/Brinell tests on metal. Brinell and Vickers indentation hardness tests which do not require vision measurement can also be performed. • The HR-610A /620A main unit is operable with the touch panel display and the HR-620B is operable with the touch panel display and AVPAK software. • Automatic testing with movement in the X-, Y- and Z-axis directions for a workpiece having uneven surfaces or steps becomes possible by adding an X-axis stage and AVPAK software to HR-620B. Also, using FORMEio software makes possible easy communication with PLCs for automation purposes, such as control of handling devices and work cells. Order No. 810-237*2 Model HR-530 Indenter type 1/16" Tungsten carbide ball Unit (display unit) metric/inch Applicable standards JIS B 7726, ISO 6508-2 Hardness testing methods Rockwell/Rockwell Superficial/Brinell/Plastics hardness Initial test force N (kgf) 29.42 (3) 98.07 (10) Rockwell Superficial 147.1 (15) 294.2 (30) 441.3 (45) Brinell 61.29 (6.25) 98.07 (10) 153.2 (15.625) 245.2 (25) 294.2 (30) 306.5 (31.25) 612.9 (62.5) 980.7 (100) 1226 (125) 1839 (187.5) Rockwell 588.4 (60) 980.7 (100) 1471 (150) Power supply AC100/120/220/240 V Auto-selection Main unit (W×D×H) 250×667×621 mm (W×D×H) Touch-panel display unit 191×147×71 mm Mass Main unit: Approx. 60 kg Display: Approx. 1.1 kg *2 1/16" carbide ball indenter is equipped as a standard accessory Note: Plastic testing may not be enabled depending on the material. For Brinell hardness, indentation Brinell hardness, and plastic hardness testing, other special accessories are required. ` Cataloge: